transmitter output tube

transmitter output tube
transmitter output tube Senderendröhre f

English-German dictionary of Electrical Engineering and Electronics. 2013.

Игры ⚽ Нужно сделать НИР?

Schlagen Sie auch in anderen Wörterbüchern nach:

  • Inductive output tube — The inductive output tube or IOT is a variety of vacuum tube which evolved in the 1980s to meet increasing efficiency requirements for high power RF amplifiers. The primary commercial use of IOTs is in UHF television transmitters, where they have …   Wikipedia

  • Transmitter — For biologic transmitters, see transmitter substance. Commercial FM broadcasting transmitter at radio station WDET FM, Wayne State University, Detroit, USA. It broadcasts at 101.9 MHz with a radiated power of 48 kW. In electronics and… …   Wikipedia

  • Vacuum tube — This article is about the electronic device. For experiments in an evacuated pipe, see free fall. For the transport system, see pneumatic tube. Modern vacuum tubes, mostly miniature style In electronics, a vacuum tube, electron tube (in North… …   Wikipedia

  • Traveling-wave tube — A traveling wave tube (TWT) is an electronic device used to amplify radio frequency signals to high power, usually in an electronic assembly known as a traveling wave tube amplifier (TWTA).The bandwidth of a broadband TWT can be as high as three… …   Wikipedia

  • Spark-gap transmitter — A spark gap transmitter is a device for generating radio frequency electromagnetic waves. These devices served as the transmitters for most wireless telegraphy systems for the first three decades of radio (1887 ndash;1916) and the first… …   Wikipedia

  • Radio transmitter design — In plate modulation systems the voltage delivered to the stage is changed. As the power output available is a function of the supply voltage, the output power is modulated. This can be done using a transformer to alter the anode (plate) voltage.… …   Wikipedia

  • Video camera tube — In older video cameras, before the mid to late 1980s, a video camera tube or pickup tube was used instead of a charge coupled device (CCD) for converting an optical image into an electrical signal. Several types were in use from the 1930s to the… …   Wikipedia

  • Russian tube designations — Receiver tubes = In the 1950s a 5 element system (GOST 5461 59, later 13393 76) was adopted in the (then) Soviet Union for designating receiver vacuum tubes.The 1st element (from left to right) is (for receiving tubes) a number specifying… …   Wikipedia

  • Domžale radio transmitter — The Domžale Transmitter is a facility for medium wave broadcasting near Domžale, in Slovenia. The first transmitter was built in 1928 and used until its destruction in 1941, during World War II. A t antenna with 5 wires, it was hung on two 120… …   Wikipedia

  • Nauen Transmitter Station — Large adjustable antenna in Nauen, 2004 Nauen Transmitter Station (German: Grossfunkstelle Nauen or Sender Nauen) in Nauen, Havelland (Kreis), Brandenburg, Germany, is the oldest transmitting plant in the world. It was founded on 1 April 1906 by… …   Wikipedia

  • Audion tube — Audion redirects here. For other uses, see Audion (disambiguation). Triode Audion from 1908. (The 1906 Audion was a 2 element device with the signal applied to a wire wrapped around the glass envelope.) The Audion is an electronic amplifying… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”